Marvell XScale PXA270 Microcontroller, Operating frequency 520MHz- The system can be updated through Ethernet/USB/Serial port
- Supporting WinCE 6.0
DevKit270 Main Board
The DevKit270 main board can support 16-gray STN-LCDs or 256-color STN-LCDs of various size and the maximum virtual screen size in 256 color mode is up to 4096*1024. It can also support 1, 2, 4 or 8-bpp TFT-LCDs of various size and the maximum virtual screen size in 64K color mode is up to 2048*1024. Embest offers, as options, a DATA IMAGW 7" TFT LCD with 800*480 pixels resolution and a tiny RFID antenna board.
The DevKit270 main board is able to support WinCE OS. The software package includes WinCE6.0 BSP and drivers of which many are in source code. Embest also provide user manual, schematic drawing and datasheet documents to help customers better understand the board. This would be an ideal solid basis for your embedded applications
DevKit270 Development Kit
Click here to view interfaces of the Devkit270
Click here to view interfaces of the Devkit270
Features of DevKit270 Main Board
- Dimensions: 109.6mm x 80mm
- Working temperature: –20°C to 85°C
- Processor: Marvell XScale PXA270 can work up to 520MHz
- Power supply: 3500mAH Lithium battery
- 3-pin Battery interface (connect to 3,500MAH Lithium battery)
- Power charger interface (included in one 22-pin socket, connecting to 6V~9V DC power)
- 128MByte SDRAM
- 1GByte MDOC (Disk-On-Chip)
- One 9-wire RS232 serial port (included in one 22-pin socket)
- One USB1.1 Host port
- One USB1.1 Device port (included in one 22-pin socket)
- Bluetooth antenna (BC41B143A, support Bluetooth earphone and Bluetooth printer)
- Support wireless LAN (LBWA18HEPZ, WLAN 802.11 b/g)
- LCD interface (STN or TFT)
- 4-wire touch screen interface
- One mini SD card socket (support the maximum capability up to 2Gbyte)
- Audio output port (earphone)
- RFID antenna interface (RFID frequency: 13.56MHz, support ISO15693, 14443A/B)
- RFID antenna (a small RFID antenna board, optional*)
- Barcode scanner interface
- Two buttons (RESET and ON/OFF)
- One 3-pin EXT KEY interface (two buttons can be extended through the interface for the barcode scanner control)
- 20-pin JTAG interface (led out by test points on the rear of the board)
- Supporting WinCE6.0
Note: The DevKit270 main board has one 22-pin socket surface mounted on it. The socket is compatible with HP PDA. The 9-wire serial port, power charger interface and USB Device port of the DevKit270 main board are all led out from this socket. Embest provides a data cable to connect this board to your needed peripheral device
- Dimensions: 109.6mm x 80mm
- Working temperature: –20°C to 85°C
- Processor: Marvell XScale PXA270 can work up to 520MHz
- Power supply: 3500mAH Lithium battery
- 3-pin Battery interface (connect to 3,500MAH Lithium battery)
- Power charger interface (included in one 22-pin socket, connecting to 6V~9V DC power)
- 128MByte SDRAM
- 1GByte MDOC (Disk-On-Chip)
- One 9-wire RS232 serial port (included in one 22-pin socket)
- One USB1.1 Host port
- One USB1.1 Device port (included in one 22-pin socket)
- Bluetooth antenna (BC41B143A, support Bluetooth earphone and Bluetooth printer)
- Support wireless LAN (LBWA18HEPZ, WLAN 802.11 b/g)
- LCD interface (STN or TFT)
- 4-wire touch screen interface
- One mini SD card socket (support the maximum capability up to 2Gbyte)
- Audio output port (earphone)
- RFID antenna interface (RFID frequency: 13.56MHz, support ISO15693, 14443A/B)
- RFID antenna (a small RFID antenna board, optional*)
- Barcode scanner interface
- Two buttons (RESET and ON/OFF)
- One 3-pin EXT KEY interface (two buttons can be extended through the interface for the barcode scanner control)
- 20-pin JTAG interface (led out by test points on the rear of the board)
- Supporting WinCE6.0
Software
OS
Item
Feature
Description
Wince
6.0
Bootloader
Eboot
Bootloader for WinCE (Supports downloading image through Ethernet or USB or serial port)
Driver
(source code)
Autorotation
Windows interface can rotate 90/180/270/360 degree automatically.
BACKLIGHT
Backlight (If WinCE system is suspended, the backlight will be turned off)
BATTDRVR
Battery
BCSP
Bluetooth (use serial port for transferring)
DOC
Msystem flash MDOC H3
EV15
EV15 symbol scanner
gspi_wifi
Marvell 8086 SPI Chipset
HCD
USB Host
PWRBUTTON
Power management (Change the power status between suspend and wake up)
KEYPAD
USB mouse and USB Keypad
SERIAL
Three full-function serial ports: one for Bluetooth, one for scanner and one for EBOOT debugging.
SDHC
SD (MMC/SDIO)
TOUCH
Touch Screen
TRF7960
RFID (Chipset: TI TRF9760)
USBFN
USB Device
WAVEDEV2
WolfSon: driver for Audio.
| OS | Item | Feature | Description |
| Wince 6.0 | Bootloader | ||
| Eboot | Bootloader for WinCE (Supports downloading image through Ethernet or USB or serial port) | ||
| Driver (source code) | Autorotation | Windows interface can rotate 90/180/270/360 degree automatically. | |
| BACKLIGHT | Backlight (If WinCE system is suspended, the backlight will be turned off) | ||
| BATTDRVR | Battery | ||
| BCSP | Bluetooth (use serial port for transferring) | ||
| DOC | Msystem flash MDOC H3 | ||
| EV15 | EV15 symbol scanner | ||
| gspi_wifi | Marvell 8086 SPI Chipset | ||
| HCD | USB Host | ||
| PWRBUTTON | Power management (Change the power status between suspend and wake up) | ||
| KEYPAD | USB mouse and USB Keypad | ||
| SERIAL | Three full-function serial ports: one for Bluetooth, one for scanner and one for EBOOT debugging. | ||
| SDHC | SD (MMC/SDIO) | ||
| TOUCH | Touch Screen | ||
| TRF7960 | RFID (Chipset: TI TRF9760) | ||
| USBFN | USB Device | ||
| WAVEDEV2 | WolfSon: driver for Audio. |
Dimensions of DevKit270 Main Board
Relative Documentation and Links
DevKit270 Development Kit Overview Marvell XScale PXA270 datasheet http://www.armkits.com/product/images/devkit270con.gif
SBC6300X Single Board Computer
- Atmel's AT91SAM9263, Operating frequency 200MHz
- Flexible Design with a Controller Board Mounted on an Expansion Board
- 8 UARTs, 2 Ethernet, USB, CAN, LCD, Touch Screen, SD, Keyboard, Audio,…
- Supporting Linux 2.6 and WinCE 6.0
Features
Daughter Board (Mini6300)
Items
Description
Dimension
52mm x 52mm
Processor
Atmel AT91SAM9263 (ARM926EJ-S core with MMU capable of 200 MHz operation)
Memory
64MB SDRAM, 128MB Nand Flash, 4MB Nor Flash, 4MB Data Flash, 2Kbit EEPROM
Expansion
Connector
Two 0.8mm, 100pin Free Height (FH) surface-mount connectors for connecting with expansion board
Mother Board
Items
Description
Dimension
150mm x 143.5mm
Ethernet
Two 10/100Mbps
TFT-LCD
40pin (2*20pin, 2.54mm) LCD interface, supporting resolution up to 2048 x 2048
Touch ADC
4-wire resistive
USB port
Two host and one device
Serial port
Eight Serial ports (Debug: 3-wire RS232/TTL, COM0: 5-wire RS232/TTL, COM1: 5-wire RS232/TTL, COM2: 3-wire RS232/TTL/half-duplex RS485, EXT_COM1/2/3/4: 5-wire RS232)
CAN
One CAN2.0 interface
TWI
TWI interface
Keyboard
6 x 6 keyboard interface (can be used as 12 independent IOs)
Audio
Audio input and output
ADC
8-channel 12-bit ADC
RTC
with a backup battery
JTAG
20-pin Jtag interface
Keys
Four keys (2 for GPIO, 1 for Wakeup and 1 for Reset)
SD card
One SD card slot (SDIO mode, support hot plugging)
Buzzer
Buzzer
Panel
20pin Panel interface (Reset & Wakeup & IO & Switch)
GPIO
41 GPIOs (can multiplex with interfaces including ISI, 4 PWM, 1 SDIO and 1 SPI1)
OS
Windows CE 6.0 BSP
Linux 2.6.24 BSP
- Atmel's AT91SAM9263, Operating frequency 200MHz
- Flexible Design with a Controller Board Mounted on an Expansion Board
- 8 UARTs, 2 Ethernet, USB, CAN, LCD, Touch Screen, SD, Keyboard, Audio,…
- Supporting Linux 2.6 and WinCE 6.0
- Flexible Design with a Controller Board Mounted on an Expansion Board
- 8 UARTs, 2 Ethernet, USB, CAN, LCD, Touch Screen, SD, Keyboard, Audio,…
- Supporting Linux 2.6 and WinCE 6.0
Features | |
| Daughter Board (Mini6300) | |
| Items | Description |
| Dimension | 52mm x 52mm |
| Processor | Atmel AT91SAM9263 (ARM926EJ-S core with MMU capable of 200 MHz operation) |
| Memory | 64MB SDRAM, 128MB Nand Flash, 4MB Nor Flash, 4MB Data Flash, 2Kbit EEPROM |
| Expansion Connector | Two 0.8mm, 100pin Free Height (FH) surface-mount connectors for connecting with expansion board |
| Mother Board | |
| Items | Description |
| Dimension | 150mm x 143.5mm |
| Ethernet | Two 10/100Mbps |
| TFT-LCD | 40pin (2*20pin, 2.54mm) LCD interface, supporting resolution up to 2048 x 2048 |
| Touch ADC | 4-wire resistive |
| USB port | Two host and one device |
| Serial port | Eight Serial ports (Debug: 3-wire RS232/TTL, COM0: 5-wire RS232/TTL, COM1: 5-wire RS232/TTL, COM2: 3-wire RS232/TTL/half-duplex RS485, EXT_COM1/2/3/4: 5-wire RS232) |
| CAN | One CAN2.0 interface |
| TWI | TWI interface |
| Keyboard | 6 x 6 keyboard interface (can be used as 12 independent IOs) |
| Audio | Audio input and output |
| ADC | 8-channel 12-bit ADC |
| RTC | with a backup battery |
| JTAG | 20-pin Jtag interface |
| Keys | Four keys (2 for GPIO, 1 for Wakeup and 1 for Reset) |
| SD card | One SD card slot (SDIO mode, support hot plugging) |
| Buzzer | Buzzer |
| Panel | 20pin Panel interface (Reset & Wakeup & IO & Switch) |
| GPIO | 41 GPIOs (can multiplex with interfaces including ISI, 4 PWM, 1 SDIO and 1 SPI1) |
| OS | Windows CE 6.0 BSP |
| Linux 2.6.24 BSP | |
Software | |||
| OS | Item | Feature | Description |
| Linux | BIOS | bootstrap | Data Flash/Nand Flash/Nor Flash |
| u-boot | Data Flash/Nand Flash/Nor Flash | ||
| Support downloading/programming kernel and file system through Ethernet. | |||
| Kernel | Linux2.6.24 | Support ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/YAFFS2 file systems | |
| Drivers | Serial | CPU itself has 3-channel serial ports and 1-channel debug port | |
| 4 RS232 serial ports extended through SC16C554 | |||
| RTC | RTC driver | ||
| NET | Two 10/100M Ethernet ports driver | ||
| LCD | TFT LCD driver (Support 320x240, 480x272, 680x480 and 800x480 resolution) | ||
| Touch Screen | Touch screen controller ads7843 driver | ||
| Audio | Audio input and output driver | ||
| USB host | USB host driver | ||
| USB device | USB device driver | ||
| Buzzer | Buzzer driver | ||
| Keypad | GPIO 6*6 keyboard driver | ||
| CAN | CAN driver | ||
| GPIO | GPIO driver | ||
| LED | LED driver | ||
| Watchdog | Watchdog driver | ||
| SD card | SD card driver | ||
| Web Server | Web server | apache | |
| WinCE | Bootloader | firstboot | Data Flash/Nand Flash |
| eboot | Data Flash/Nand Flash | ||
| Support downloading/updating image through Ethernet | |||
| Kernel | Serial | CPU itself has 3-channel serial ports and 1-channel debug port | |
| 4 RS232 serial ports extended through SC16C554 | |||
| RTC | RTC driver | ||
| NET | Two 10/100M Ethernet ports driver | ||
| LCD | TFT LCD driver (Support 320x240, 480x272, 680x480 and 800x480 resolution) | ||
| Touch Screen | Touch screen controller ads7843 driver | ||
| USB Host | USB Host driver | ||
| USB Device | USB Device driver | ||
| Buzzer | Buzzer driver | ||
| Keypad | 6*6 GPIO keyboard interface | ||
| USB device | USB device driver | ||
| Keypad | 8*8 keyboard interface | ||
| LED | LED driver | ||
| GPIO | GPIO driver | ||
| Watchdog | Watchdog driver | ||
| CAN | CAN driver | ||
| Audio | Audio input and output driver | ||
| ADC | 8-channel 12-bit ADC driver | ||
| SD | SD card driver | ||
| EVC test program | | Provide EVC test program for each driver module. | |
